You are here:          
PowerKon NT

PowerKon NT

The PowerKon NT is a low temperature heater with fan assistance, intended for use in low and very low temperature heating systems, for use, for example, with heat pumps. It is ideal for use in new build projects or in refurbishments.
design-orientated
low-noise
high-performance
Overview KaControl
control system Calculation
program Downloads Accessories FAQ Request for
information

Features

 
  • Single-section “designer“ convector casing made of sheet steel, smooth finish and easy to clean, powdercoated in RAL 9016 traffic white, with air outlet through a linear grille RAL 9006 white aluminium (other colours available on request)
  • PowerKon copper/aluminium heat exchanger with corrugated fins
  • Energy-saving, whisper-quiet EC-motor with power stage for rapid warm-up
  • Electromechanical control or fully automatic KaControl options, with fitted plug
  • Condensation-free cooling operation is also possible

  

EC technology 

 
Saving energy and hence also saving operating costs is yet a further reason for buying these units! That's why we use GreenTech EC fans manufactured by ebm-papst in our PowerKon NT units, which offer energy savings of up to 50% alongside whisper-quiet operation.

Powerkon NT units are operated for long periods of time, which is why energy-savings are especially noticeable here. Our PowerKon NT units save up to 50% energy compared with conventional AC fans by using GreenTech EC fans from ebm-papst. Their whisper-quiet operation and individual controllability also enhance user comfort. Take advantage of our knowledge and expertise in the field of efficient heating technology.
 

Installation

 
  • “Quick fit“ system
  • Fit without the need for screws
  • Simple to install
  • Wired for operation; comes complete with plug
 

Assembly Procedure PowerKon NT

 
PowerKon NT
 



Services

We can offer you comprehensive services for our products:
  • Advice on site
  • Seminars
  • Non-standard solutions
  • Project solutions
  • Design ideas
  • Site measurement/Installation

 Give us a call


Call-back service Quick links
 
Do you require further information or do you have a question to put to us?

We will call you back!







 Give us a call

KaControl control system

Description

 
PowerKon NT with KaControl technology provides a completely pre-set solution for ultra-simple installation in site. The KaController (control unit) is factory-fitted into the PowerKon NT casing (control version -C0) or is also available as an external control unit (control version -C1).
 

Functions

 
  • Temperature is recorded by the KaController, induction sensor or external room sensor
  • Automatic continuous fan control depending on room temperature
  • Maximum fan speed can be set via a potentiometer on the PCB
  • Fast warm-up by manual boost (max. 15 minute run time)
  • Silent valve actuation via electronic relays
  • Motor fault evaluation
  • Room frost protection function by monitoring of room temperature at every state to a limit value of 8°C
  • Changeover function in 2-pipe systems (heating/cooling) via an external potential-free contact or a clip-on temperature sensor
  • Actuation by means of 0-10 V signal from an external BMS
  • Connection to open BMS systems bu optional interface cards (BACnet, Modbus)
 

System set-up

 
Control zones with up to 6 PowerKon NT can be connected via simple 2-wire bus connection to a KaController.
 
Download: KaControl Set-up for PowerKon NT
 
PowerKon NT
 



Services

We can offer you comprehensive services for our products:
  • Advice on site
  • Seminars
  • Non-standard solutions
  • Project solutions
  • Design ideas
  • Site measurement/Installation

 Give us a call


Call-back service Quick links
 
Do you require further information or do you have a question to put to us?

We will call you back!







 Give us a call

CAD

DataNorm

Search for specification texts


Calculation program PowerKon NT

1. Please select the product group required:


Length (mm):
Please choose
750 1000 1250 1500 1750 2000 2250 2500 2750
Operating stage:
Please choose
Power stage Basic load operation 35 dB(A) Basic load operation 28 dB(A) Natural convection
Control option:
Please choose
electromechanical KaControl, factory-integrated KaControl, external


2. Calculate heat outputs and heating medium flow rate


Flow temperature (tw1 in °C):
Return temperature (tw2 in °C):
Room air temperature (tL in °C):

Downloads

Search for specification texts



Technical catalogues




Leaflets/Flyers


  • Kampmann spezial PowerKon NT
    screen-optimized
    PowerKon NT DownloadDownload now (.pdf, 1115.02KB)
  • Kampmann spezial PowerKon NT
    Flash version
    PowerKon NT DownloadDownload now (.swf, 1555.2KB)
  • Kampmann spezial retail chains
    screen-optimized
    PowerKon NT DownloadDownload now (.pdf, 1903.38KB)
  • Kampmann spezial retail chains
    Flash version
    PowerKon NT DownloadDownload now (.swf, 6481.73KB)
  • Kampmann spezial sports hall
    screen-optimized
    PowerKon NT DownloadDownload now (.pdf, 1201.71KB)
  • Kampmann spezial sports hall
    Flash version
    PowerKon NT DownloadDownload now (.swf, 4749.42KB)
  • Kampmann spezial KaControl
    screen-optimized
    PowerKon NT DownloadDownload now (.pdf, 1116.42KB)
  • Kampmann spezial KaControl
    Flash version
    PowerKon NT DownloadDownload now (.swf, 1048.59KB)
  • PowerKon NT
    PowerKon NT DownloadDownload now (.pdf, 747.81KB)
  • KaControl building automation
    PowerKon NT DownloadDownload now (.pdf, 1861.39KB)


Installation manuals


  • PowerKon NT
    PowerKon NT DownloadDownload now (.pdf, 5406.47KB)
  • PowerKon NT
    VIDEO: installation manuals (flv-file)
    PowerKon NT DownloadDownload now (.flv, 95976.85KB)

Accessories

Control accessories for KaControl, recirculating air


KaControl CANBUS card for increasing the number of units in a one circuit system, for 7-30 units, one required per unit, type 3260301
KaControl CANBUS card for increasing the number of units in a one circuit system, for 7-30 units, one required per unit, type 3260301

Article no.:
196003260301

Price: 79,00 EUR
plus VAT
KaControl outside sensor, wall-mounted, 50 x 65 x 45,5 mm, white similar to RAL 9010, IP54, type 3250112
KaControl outside sensor, wall-mounted, 50 x 65 x 45,5 mm, white similar to RAL 9010, IP54, type 3250112

Article no.:
196003250112

Price: 38,00 EUR
plus VAT
KaControl pipe clip-on sensor for recording the medium temperature, incl. clip-on strap, 3 m cable length, for changeover heating/cooling, type 03250115
KaControl pipe clip-on sensor for recording the medium temperature, incl. clip-on strap, 3 m cable length, for changeover heating/cooling, type 03250115

Article no.:
196003250115

Price: 36,00 EUR
plus VAT
KaControl room temperature sensor, wall-mounted, IP30, colour white RAL 9010, type 3250110
KaControl room temperature sensor, wall-mounted, IP30, colour white RAL 9010, type 3250110

Article no.:
196003250110

Price: 38,00 EUR
plus VAT
KaControl RS485 card with ModBUS protocol for connection to BMS systems, type 3260101
KaControl RS485 card with ModBUS protocol for connection to BMS systems, type 3260101

Article no.:
196003260101

Price: 79,00 EUR
plus VAT
KaControl Touch, Comfort room operating unit and system controller, can be used for the overall room management of up to 24 rooms or temperature zones. Housing for mounting the front panel. One serial RS485-card is required per room/zone, art.-no. 1960032
KaControl Touch, Comfort room operating unit and system controller, can be used for the overall room management of up to 24 rooms or temperature zones. Housing for mounting the front panel. One serial RS485-card is required per room/zone, art.-no. 1960032

Article no.:
196003210311

Price: 1.649,00 EUR
plus VAT
KaController 24 V, room control unit with function buttons at the side, wall-mounted room control unit, high quality design, plastic housing, colour similar to RAL 9010, with large LCD multi-function display, with integral room temperature sensor; only for use with C1 controller, type 3210002
KaController 24 V, room control unit with function buttons at the side, wall-mounted room control unit, high quality design, plastic housing, colour similar to RAL 9010, with large LCD multi-function display, with integral room temperature sensor; only for use with C1 controller, type 3210002

Installation instructions: i385_kurz_kacontroller_int.pdf
Installation instructions: i392_kacontrol_kathermqk_gb.pdf
Installation instructions: i397_kacontrol_kathermhk_gb.pdf
Installation instructions: i443_kacontrol_tls_gb.pdf
Article no.:
196003210002

Price: 130,00 EUR
plus VAT
KaController 24 V, room control unit with one-touch operation, wall-mounted room control unit, high quality design, plastic housing, colour similar to RAL 9010, with large LCD multi-function display, with integral room temperature sensor; only for use with C1 controller, type 3210001
KaController 24 V, room control unit with one-touch operation, wall-mounted room control unit, high quality design, plastic housing, colour similar to RAL 9010, with large LCD multi-function display, with integral room temperature sensor; only for use with C1 controller, type 3210001

Installation instructions: i385_kurz_kacontroller_int.pdf
Installation instructions: i392_kacontrol_kathermqk_gb.pdf
Installation instructions: i397_kacontrol_kathermhk_gb.pdf
Installation instructions: i443_kacontrol_tls_gb.pdf
Article no.:
196003210001

Price: 130,00 EUR
plus VAT

Control accessories


Connection set comprising a 1/2
Connection set comprising a 1/2

Article no.:
194000128102

Price: 75,00 EUR
plus VAT
Room thermostat with built-in speed controller, surface-mounted model with On/Off fan switch, white, only for use with -00 electromechanical controller
Room thermostat with built-in speed controller, surface-mounted model with On/Off fan switch, white, only for use with -00 electromechanical controller

Installation instructions: i108_raumthermostat_146924_gb.pdf
Article no.:
194000146924

Price: 53,00 EUR
plus VAT

Product alternatives

FAQ

Where can PowerKon NT be installed?


PowerKon NT is ideal for use in low-temperature and ultra-low temperature heating systems, both for refurbishment projects and new build. Users therefore have an ideal heating system for cost-effective use, possibly in conjunction with heat pumps, thanks to the energy-saving fan unit with EC motor technology combined with the very latest control technology.  
 
 

How can rooms be quickly heated up using PowerKon NT?


You can heat up rooms quickly by manually setting the controller to the maximum Fan speed = Power stage for a limited time. 
 
 

Can PowerKon NT be combined wither other low temperature systems?


Yes, PowerKon NT can also be combined with surface heating systems. The PowerKon NT then takes on the role of a fast-reacting heating system compared with the sluggishness of a surface heating system.

Technical details

Enquiry about "PowerKon NT"

Your enquiry
I am interested in services about this product:





Title:
First name *
Name *
Company *
Department *
Address, House number *
Postcode, Town/City *
Country
Phone *
Fax:
E-mail *

Please enter the following security code:
Please enter the following security code

All fields marked with an (*) are mandatory fields.

References

Variants

 
Low temperature radiator