Note
Your browser does not support the automatic addition of Favourites.
Use the Ctrl + D shortcut instead.
Ok
Kampmann
Print page
Recommend page
Bookmark this page
ProductsCompanyResearch & DevelopmentReferencesCareersInformation PortalContact
english english
deutsch deutschpolski polskifrançais françaisnederlandse nederlandseрусский русскийitaliano italiano中文 中文
You are here:
Home
   
Research & Development
   
Sound chamber


Research & Development Centre at a GlanceAir flow laboratoryClimate chamberMulti-purpose laboratorySound chamberMobile measuring equipmentProject-related servicesCooperative partnershipsContact with the FEC
Hotels/MotelsRetail and industrial premisesHomes and conservatoriesOffice and commercial spaceRetail outletsChurches / historical buildingsMeeting and conference roomsLeisure and riding centresCommunity centres, pubs, restaurantsSchools
Kampmann Newsletter Receive information
on the company
and the industry
Recently viewed:
Ultra

Unit Heaters

Ultra

Galaxis Z

Radiant Ceiling Panels

Galaxis Z

Galaxis radiant panels

Radiant Ceiling Panels

Galaxis radiant panels

Kampmann Mobile
Kampmann Mobile

mobile!

The most recent
Kampmann news
for your
smartphone!
www.kampmann-uk.co.uk/mobile
Print page   Print page Recommend page   Recommend page Bookmark this page   Bookmark this page RSS feed   RSS feed Call-back service   Call-back service Familienfreundlich zertifiziert
Kampmann in XING: Klicken Sie uns an!


Sound chamber

Semi-anechoic room

 
The centrepiece of the sound chamber is a semi-anechoic room with a usable volume of 8.4 m x 6.4 m x 5.2 m. It is located in a 35 to 40 cm thick concrete cube that guarantees a maximum background sound pressure level of 15 db(A) and is lined with approx. 40 cm thick rockwool and fibreglass and 45 cm wedge absorbers. These ensure freedom of reflection in a frequency range of 100 Hz to 12,000 Hz. The entire concrete cube, weighing just under 450 tons, was placed on springs to prevent any disruptive vibrations affecting the floor. The room therefore provides ideal conditions to test and optimise the acoustics of the quietest units. The sound chamber is certified for measurements in accordance with ISO 3745.
 
Sound intensity measurements to determine sound power levels in accordance with ISO 9614 or sound location are also carried out under these conditions in addition to sound power level measurements in accordance with ISO 3744 to 3746.
 
Speeds, vibrations, electrical measurements etc. are recorded at the same time in addition to sound pressures, depending on the requirements. All of the measuring systems used are mobile and can also be used for on-site measurements if required.
 
The sound chamber can be rented for use with your own measuring systems.
 
Click here to contact the FEC.
 
 
       Move the cursor over the image and find out more about the test setup shown.
 

 

At a glance

 
Measuring technology
  • 12 channel Orchestra measuring system
  • 10 microphones (class 1)
  • Sound intensity probe
  • 300 W hemispherical loudspeakers
  • Various vibration sensors
  • Two laser speed sensors
Test chamber Semi-anechoic room, certified in accordance with ISO 3745
Usable size 8.4 x 6.4 x 5.2 m (L x W x H)
Weight approx. 450 t, spring mounted
Door size 4,5 x 4,0 m
Floor
  • As a raised floor (can also be removed), height 0.8 m
  • Thickness of wedges 45 cm
  • Insulation 40 cm
Frequency range 100 Hz to 12.5 kHz
Sound power level in accordance with DIN EN ISO 3744, 3745, 3746, ISO 9614 1-3
Background sound pressure level Guaranteed background sound pressure level 15 dB(A)
  
 

Photo gallery

 
Please click on an image to enlarge it:
 

 
 
Kampmann
Home | Legal Notices | Sitemap | Products | Company | Research & Development | References | Careers | Information Portal | Contact | Imprint
Copyright ©2012. Kampmann GmbH. All rights reserved.
Last modified: "Sound chamber - Research & Development": 18.05.2012
  Back     To top